ACD 9850
20
Restart following an interruption
of the power supply
(code system is activated)
•
Turn on the radio.
The display shows “CODE”.
•
Briefly press preset button 1, the dis-
play shows “0000”.
•
Enter the code number given in the car
radio passport:
Example: The code number is 2521.
- Press preset button 1 twice; the dis-
play shows “2000”.
- Press preset button 2 five times; the
display shows “2500”.
- Press preset button 3 twice; the dis-
play shows “2420”.
- Press preset button 4 once; the dis-
play shows “2521”.
•
To confirm the code number:
Press the rocker button
.
Now your car radio is ready for operation.
However, if the display again shows four
dashes, you have made a mistake. In this
case go ahead entering the correct code
number after the waiting period has elapsed
(“CODE” in the display).
Note:
Keep your car radio passport including the
code number in a safe place in order to avoid
“unauthorised access” to your car radio.
If the power supply to the unit is interrupted
while the code system is switched on, you
need to know the right code number.
The radio will function again as soon as you
have entered the correct code.
If you have lost your radio passport and
forgotten the code number, your radio can
only be made operable again by one of our
authorised customer service workshops,
which is subject to payment.
Switching the code system on
To activate the code system:
•
Turn off the radio.
•
Press preset buttons 1 and 4 simulta-
neously, hold down and
•
turn the set back on again.
The display briefly shows “CODE” befo-
re the set is switched on.
•
Release presets 1 and 4.
Now the code system is activated.
In future, “CODE” will always be briefly dis-
played each time the radio is turned on.
When turning the radio off during the waiting
time, this period is reset and will start anew as
soon as the unit is switched on again.
Switching the code system off
•
Turn off the radio.
•
Press preset buttons 1 and 4 simulta-
neously, hold down and
•
turn the set back on again.
The display shows “CODE”.
•
Now enter the code number of the car
radio passport and confirm (see ex-
ample under “Restart ...”.
The code system is switched off.
Switching the code-LED on/off
When the car is stationary, you may let the
LED below the display flash for additional
theft protection.
Condition: The function is switched on (“LED
ON”)
To switch on/off (radio turned on, no CD
inserted):
•
Press / SRC until “LED ON” / “LED
OFF” is displayed.
•
Use the
buttons to activate the
desired mode.
