51
EN
GLISH
Setting the volume of the lane
warning device
If the bus is equipped with a lane warning
device and it is properly connected to the
system, an inadvertent crossing of the road
marking generates a warning signal. The
volume of this signal can be adjusted.
Press the
AUD
button
G
for cockpit.
Select "
*
MORE" with the left rotary/
pushbutton
I
.
Press the left rotary/pushbutton
I
.
The display shows "CODE".
Press the left
I
and the right rotary/
pushbutton
:
at the same time for
confi rmation until a beep sounds.
Select "
*
SET VOL" with the left rotary/
pushbutton
I
.
Press the left rotary/pushbutton
I
.
Select "ALARM" with the left rotary/
pushbutton
I
.
Press the left rotary/pushbutton
I
.
Adjust the desired volume with the left
rotary/pushbutton
I
.
Hold the
ESC
J
button pressed until a
beep sounds and the menu is exited.
Setting the volume for traffi c
announcements
The volume for traffi c announcements can
only be adjusted for the cockpit area:
Press the
AUD
button
G
for cockpit.
Select "
*
MORE" with the left rotary/
pushbutton
I
.
Press the left rotary/pushbutton
I
.
The display shows "CODE".
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press the left
I
and the right rotary/
pushbutton
:
at the same time for
confi rmation until a beep sounds.
Select "
*
SET VOL" with the left rotary/
pushbutton
I
.
Press the left rotary/pushbutton
I
.
Select "TA V" with the left rotary/push-
button
I
.
Press the left rotary/pushbutton
I
.
Adjust the desired volume with the left
rotary/pushbutton
I
.
Hold the
ESC
J
button pressed until a
beep sounds and the menu is exited.
Playback of microphone
announcements
You have the option of connecting three
external microphones (dynamic) to the de-
vice. Microphone 1 (MIC1) is available to the
driver and microphones 2 and 3 (MIC2 and
MIC3) to the tour guide. Microphone 1 has
always priority over microphone 2 and 3.
Switching on microphone 1 interrupts
the audio playback. If the microphone is
switched off, the audio source is turned
back on.
Setting the volume for microphone
announcements
During a microphone announcement, the
volume can be adjusted with the rotary/
pushbutton
:
. The value is stored.
To set the volume for the microphone an-
nouncements,
press the
AUD
button
8
for cabin.
Select "
*
MORE" with the right rotary/
pushbutton
:
.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the volume
02_CCU02MP3Prof_eng.indd 51
02_CCU02MP3Prof_eng.indd 51
16.08.2006 14:48:57 Uhr
16.08.2006 14:48:57 Uhr