12
RESIDUAL HEAT DISPLAY
After the cooking zones or hob have been switched off, the residual heat of the cooking zones
that are still hot is displayed with an [ H ]. The [ H ] will disappear if the cooking zones can be
touched safely. As long as the residual heat display is lit, the cooking zones should not be
touched and no heat-sensitive objects should be placed on them:
Risk of burns!
BOOSTER FUNCTION (POWER LEVEL)
All cooking zones are equipped with a booster function, i.e. with power amplification. The
booster function is displayed with [ P ]. If they are switched on, these cooking zones operate
for a period of 10 minutes. This high power is intended to enable you to do things like quickly
heating large quantities of water, to boil water for pasta for example. After the appliance has
automatically switched back after 10 minutes, you should
not switch back to the booster.
The appliance could overheat and will trigger a safety shutdown.
Switching booster on/off:
Operation
Operating panel
Display
Switch on booster
Slide your finger over the
Smart Slider or press the end
immediately
[ P ]
Switch off booster
Slide your finger over the
Smart Slider or press the end
immediately
[ 9 ] to [ 0 ]
Management of the maximum power:
The hob is equipped with a maximum power level. To ensure that this maximum power is not
exceeded, the electronics automatically reduce the cooking level of another cooking zone when
the booster function is activated. This cooking zone will then display the reduced power [ 9 ] by
flashing.
Selected cooking zone
Other cooking zone (e.g.: Power level 9)
[ P ]
lights up
[ 9 ]
is reduced to [ 6 ] or [ 8 ] and flashes
