BLAUBERG Sileo V2, Operation Manual, Page: 7 / 20

7
EN
Fan mounting steps are shown in Fig. 4-12.
Wiring options are shown in Fig. 13-18.
Adjustment of the turn-off delay timer, interval timer of humidity sensor settings is shown in Fig. 19.
OPERATION INDICATION
Basic model and model with a switch:
The light indicator glows orange during the fan operation.
The light indicator is off when the fan is off.
T and H models:
1. The light indicator blinks green once in 5 seconds the fan operates with minimum speed in standby mode.
2. The light indicator blinks green once in a second the turn-on delay time is activated (60 seconds).
3. The light indicator glows red the humidity sensor is activated and the fan runs with the high speed.
4. The light indicator glows green the switch is ON and the fan runs with the high speed.
5. The light indicator blinks green and red once in 1 second the turn-off delay timer is activated.
WARNING !
If the switch is OFF or the indoor humidity falls below the set point within 60 seconds after activation of the switch or the
humidity sensor, the fan continues operation with the low speed.
MAINTENANCE
The fan maintenance periodicity is at least once per 6 months.
Uplift the latches carefully and open the front cover with a flat screwdriver, Fig. 21.
To clean the fan use a soft cloth or a brush wetted in a mild detergent solution, Fig. 22-24.
WARNING!
Avoid water dripping on the electric components.
Wipe the fan surfaces dry after cleaning.
TRANSPORTATION AND STORAGE RULES
Transportation with any transportation vehicle in the manufacturer's original package.
Store the delivered product in the manufacturer's original packing box in a dry ventilated premise with the temperature
from +5 °C up to + 40 °C and relative humidity below 80 %.
The storage environment must not contain dust, acid or alkali vapours that may cause corrosion of the product parts.