BLAUBERG Sileo V2, Operation Manual

Page: 6 / 20

DELIVERY SET
1. Fan - 1 item
2. Screws and dowels - 4 items
3. Plastic screwdriver (only for the models with a timer) - 1 item
4. User's manual - 1 item
5. Packing box
BRIEF DESCRIPTION
The products is an axial fan for exhaust ventilation of small to medium-sized premises.
The fan is designed for connection to 100 and 125 mm air ducts.
The fan is equipped with a two-speed motor.
The fan with a back valve to prevent back air flow during the fan standby.
MODIFICATIONS:
6
S : the fan is equipped with a built-in pull cord switch.
The operating logic is shown in Fig. 13-15.
T : the fan is equipped with a turn-off delay timer and an interval timer.
The operating logic is shown in Fig. 17.
H : the fan is equipped with a turn-off delay timer and a humidity sensor.
The operating logic is shown in Fig. 18.
OPERATION GUIDELINES
The fan is rated for connection to AC single-phase 220 240 V / 50 Hz.
The fan is rated for operation at the ambient air temperature from +1 °C up to +45 °C.
Ingress protection rating against access to hazardous parts and water ingress is IP 45.
The fan requires no grounding.
MOUNTING
The fan is designed for vertical or horizontal installation and connection to a ventilation shaft or a round air duct of a
matching diameter, Fig. 2.
Attention!
In case of vertical mounting the fan must be protected against ingress of rainfalls and condensate inside the fan, Fig. 2.
Fan installation with direct air discharge upwards is not allowed, Fig. 3.
Read the user's manual carefully before proceeding with installation works.
Compliance with the manual requirements ensures reliable operation and long
service life of the product.
Keep the user's manual available as long as you use the product.
You may need to re-read the information on the product servicing.
EN