www.blaubergventilatoren.de
3
FRESHBOX 60
BLAUBERG Ventilation GmbH
is happy to offer your attention a new high-
quality single room air handling unit with heat recovery FRESHBOX 60.
The solid team of high-qualified professionals with many years of working
experience, technological innovations in design and production, high-quality
components and materials from the top worldwide producers have become
the precondition for the best single room air handling unit in its class.
INTRODUCTION
The present service instruction contains technical description, technical data
sheets, operation and mounting guidelines, safety precautions and warnings
for safe and correct operation of the unit.
GENERAL
The single-room unit is designed for efficient energy saving supply and
exhaust ventilation of flats, houses, cottages and other small premises.
The unit is for wall mounting.
The unit is designed for continuous operation always connected to power
mains.
SAFETY RULES
The unit complies with the requirements according to the EU norms and
directives, to the relevant EU-Low Voltage Equipment Directives, EU-
Directives on Electromagnetic Compatibility.
All operations related to the unit electrical connections, servicing and repair
works are allowed only after the unit is disconnected from power mains.
All mounting and servicing operations are allowed for duly qualified
electricians with valid electrical work permit for electric operations at the
units up to 1000 V after careful study of the present user's manual.
The unit must be grounded!
Please follow the safety regulations and working instructions (DIN EN 50 110,
IEC 364).
Make sure the impeller and the casing are not damaged before connecting
the unit to power mains. The casing internals must be free of any foreign
objects which can damage the impeller blades.
Disconnect the unit from power mains prior to any operations related to the
init servicing and repair works.
Take measures to prevent contact with the fan to avoid physical damages
during the unit test and start-up.
Misuse of the product or any unauthorized modification are not allowed.
The unit is designed for connection to AC single-phase power mains, see
"Technical Data". The unit is rated for permanent operation during non-stop
power supply.
Take steps to prevent ingress of smoke, carbon monoxide and other
combustion products into the room through open chimney flues or other
fire-protection devices. Sufficient air supply must be provided for proper
combustion and exhaust of gases through the chimney of fuel burning
equipment to prevent back drafting. The maximum permitted pressure
difference per living units is 4 Pa.
The transported air must not contain any dust or other solid impurities,
sticky substances or fibrous materials. The unit is not designed for use in an
inflammable and explosive medium.
The transported air must not have an aggressive effect on steel at the
temperature stated in the table 1 of the section “Technical data”.
Do not close or block the unit intake or exhaust vent not to disturb the
normal air passage. Do not sit on the unit and do not put objects on the unit.
Follow the manual guidelines to ensure trouble-free operation and long
service life of the product.
Hazardous parts access and water ingress protection standard IP22.
STORAGE AND TRANSPORTATION RULES
Transportation of the unit is allowed by any vehicle provided the unit is
transported in the original package and is protected against weather and
mechanical damages.
Use hoist machinery for handling and transportation to prevent possible
mechanical damages of the unit. Fulfil the requirements for transportation of
the specified cargo type during cargo-handling operations.
Store the unit in a dry and cool place in the original packing.
The storage environment must not be subjected to any aggressive and/
or chemical evaporations, admixtures, foreign objects that may provoke
corrosion and damage connection tightness.
Store the unit in an environment with minimized risk of mechanical damages,
temperature and humidity fluctuations.
Do not expose the unit to the temperatures below +5°C and above +40 °C .
Connection of the unit to power mains is allowed after the unit has been kept
indoor for minimum two hours.
MANUFACTURER'S WARRANTY
The product complies with the requirements according to the EU norms
and directives, to the relevant EU-Low Voltage Equipment Directives, EU-
Directives on Electromagnetic Compatibility.
We hereby declare that the following product complies with the essential
protection requirements of Electromagnetic Council Directive 2004/108/
EC, 89/336/EEC and Low Voltage Directive 2006/95/EC, 73/23/EEC and
CE-marking Directive 93/68/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
The manufacturer hereby warrants normal operation of the unit over
the period of 2 years from the retail sale date provided observance of the
installation and operation regulations.
In case of failure due to manufacturing fault during the warranty period the
consumer has the right to exchange it.
If case of no confirmation of the sale date, the warranty period shall be
calculated from the manufacturing date.
The replacement is offered by the Seller.
The manufacturer shall not be liable for any damage resulting from any
misuse of or gross mechanical interference with the unit.
Fulfil the operation manual requirements to ensure a trouble-free and long
service life of the unit.
WARNING
Do not dispose in domestic waste.
The unit contains in part material that can be recycled
and in part substances that should not end up as domestic
waste.
Dispose of the unit once it has reached the end of its
working life according to the regulations valid where you
are.
ATTENTION
The product is not allowed for use by children and persons with reduced
physical, mental or sensory capacities, without proper practical
experience or expertise, unless they are controlled or instructed on the
product operation by the person(s) responsible for their safety. Supervise
the children and do not let them play with the product.
!
