www.blaubergventilatoren.de
vento eco(2) a50-4 Pro
8
INSTALLATION AND SET-UP
READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.
MAKE SURE THAT THE CONTROL PANEL IS NOT DAMAGED.
DO NOT USE A DAMAGED CONTROL PANEL! DO NOT INSTALL THE CONTROL PANEL ON
AN UNEVEN SURFACE! WHILE TIGHTENING THE SCREWS, DO NOT APPLY EXCESSIVE
FORCE TO PREVENT THE CONTROL PANEL CASING DEFORMATION.
WALL-MOUNTED CONTROL PANEL INSTALLATION
Control panel mounting:
1
.
Prepare a hole in the wall
and route all the wires to the
installation place. Insert the
supplied mounting box for flush
wall mounting. The mounting
box is included in the delivery
set.
2. Use a screwdriver to carefully
undo the clips on the backside
of the control panel and remove
the back cover.
3. Screw the backside of the
casing to the mounting box
through the fastening holes.
Fastening screws for control
panel mounting are included in
the control panel delivery set.
Then connect the cable to the
control panel in compliance
with external wiring diagram.
4. Install the control panel
display and press it to fix.