BLAUBERG Ventilatoren KOMFORT EC S S11/S15 Series, Operation Manual, Page: 20 / 28

20
www.blaubergventilatoren.de
KOMFORT EC S/SB
Function Indication
16 Control panel temperature sensor correction

To correct the panel temperature sensor indications select
TEMPERATURE CORRECTION submenu from the Engineering menu and
press ENTER .

Then use or buttons to set the temperature correction for
the room temperature sensor installed in the control panel casing.

The default factory setting for the temperature sensor correction is -6°C.

To return to the Engineering menu without saving changes press EXIT
.
17 Default settings

To reset the controller settings to the factory defaults select DEFAULT
SETTINGS submenu from the Engineering menu and press ENTER .

To confi rm the reset press ENTER .

To return to the Engineering menu without saving changes press EXIT
.

The default settings are given in Table 8.
18 Current temperature review

To review the current temperatures select the CURRENT TEMPERATURES
submenu from the Engineering menu and press ENTER .

The display shows all the current temperature information.

If any temperature sensor of the ventilation unit is missing its
confi guration value is displayed as OFF .

To return to the Engineering menu press EXIT .
19 AUTO Mode (scheduled operation)
The AUTO mode enables scheduled operation of the ventilation unit. The
unit runs at the pre-set speed and temperature during the specifi ed time
periods. The unit is in the Standby mode between the operating periods.

To activate the AUTO mode press AUTO . in the control panel
Main menu . Activation of the AUTO mode is confi rmed with a tick —
.
Table 6. Unit control and adjustment of operating parameters of the unit with the S11 control panel (continued)