background image

4

938407/2-0917

Introduction

These instructions for use provide important information for the safe use and maintenance of the 
Kato Plus seating system.
Please give these instructions for use to the user or the carer and make sure that they are 
understood.
The Kato Plus is a body support system, which provides postural support and stability to both 
children and adults.

Application

The Kato Plus is for use with a wheelbase.
The Kato Plus is intended for a single user.
Please read all of these instructions for use, paying particular attention to the sections regarding 
safety and maintenance.

Features

• 

Overall postural support and stability

• 

Adjustable head support

• 

Adjustable lateral thoracic supports

• 

Medial thigh support (pommel)

• 

Anterior knee supports (knee blocks)

• 

Posture belt and posture harness (see the instructions for use).

Safety Information

This warning symbol highlights safety information which must be followed carefully.

The Kato Plus should be installed and adjusted only by a qualified clinician or seating 
engineer.

Do not attempt to install the Kato Plus in any wheelbase other than the one installed in the 
clinic.

Before using the Kato Plus, check that all secondary support devices are secure and 
function correctly. Secondary support devices include the following:

• 

Lateral supports

• 

Posture belts and posture harnesses (see the instructions for use).

• 

Medial thigh support (pommel)

• 

Anterior knee supports (knee blocks)

• 

Moulded tray

Beware of finger trap hazards when adjusting any part of the Kato Plus.

If there is any indication that the user’s head could become trapped, either behind or under 
the head support, stop using the Kato Plus and contact the wheelchair service provider.

If the user shows any continued signs of distress or discomfort, stop using the Kato Plus 
and immediately contact the wheelchair service provider.

938408

938408

Summary of Contents for Kato Plus





















Reviews: