12
938407/2-0917
Adjusting the Moulded Tray
Moulded trays provide both a work and play surface with support and control for any seating
arrangement.
To adjust the distance between the tray and the user:
1. Make sure that the two vertical stems that are on the underside of the tray are securely
located in the wheelbase location points.
2. Loosen the locking knobs that are on the underside of the tray, and adjust the position of the
tray.
3. Re-tighten the locking knobs.
To adjust the width of the tray:
1. Turn the tray over, and loosen the four screws with a large, flat-bladed screw driver.
Do not
remove the screws completely.
2. Slide the adjustment tubes either in or out to the desired
width, ensuring that they remain parallel.
3. Re-tighten the screws.
To clean the tray:
Use a damp, soapy cloth.
Adjusting Moulded Sandals and Foot Straps
Moulded sandals and foot straps provide support and control with any seating arrangement.
Make sure that the following conditions are true:
•
The straps are not twisted.
•
The buckles are adjusted so that when they
are fastened, there is no slack in the strap.
Care
Check that both the buckles and the straps are neither
excessively frayed nor excessively worn. If you are concerned
about the condition of either the buckles or the straps, contact the wheelchair service provider.
Cleaning
Use a damp, soapy cloth to clean the moulded sandals and foot straps. Use a soft brush to
remove heavier soiling.
