Blastrac BMP-320, Operating Manual

Page: 14 / 73

Operating Manual BMP-320
Safety instructions
The
operator has to be informed about all kind of maintenance
works before starting the process!
At all works that are related to normal operation, conversion of tools
adjustment of the machine and its safety devices as well as before
inspection , maintenance and repair all ON and OFF functions have
to be carried out according the operation manual and advises for
maintenance and repair.
If the equipment is switched off in order to do maintenance , repair or
adjustment it has to be secured against unintended restart.
Switch OFF and disconnect
it from the power supply and secure
the main switch with a padlock .
See
Chapter 2.6 Safety off position for specific details.
Always dispose the contends of the dust bin of the dust collector
used before loading it on van or truck. Observe the waste disposal
regulations, in uncertain situation ask your next policy level.
Do not use any aggressive cleaning materials!
Use lint-free cleaning cloths !
Always tighten any screw connections that are undone during
servicing and maintenance work!
If
safety devices need to be taken off or dismantled during service
and repair, these safety devices must be reinstalled and inspected
immediately after completion of the servicing and repair work.
Make sure that process materials and replaced parts are
disposed of safety and in an environmentally-friendly manner!
Work on electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under
the guidance and supervision of a skilled electrician as well as
in accordance with the electrical engineering regulations .
Make sure that electrical components used for replacement purposes
comply with the original parts and are correctly adjusted if necessary.
8