12
4.4
Manual moving of the machine
To move the machine manually make sure the quick lift lever is in position 1
(see picture) Squeeze in the handles of the quick lift lever and pull it
towards you until it clicks into place. The drum is now free from the surface.
Release the brake from the left wheel with your foot and the machine can
now be pushed around on its wheels.
The machine should only be moved around when the dust hose, and power
supply cable are disconnected.
WARNING!
Always make sure all rotating parts have come to a complete
standstill before moving around the machine.
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate
safety shoes when you drive the machine to or from the work area.
Make sure that no vehicles, such as forklift trucks and other equipment run over the electric cable and the dust
hose.
4.5
Removing the drum
Make sure all moving parts of the machine have come to a
complete standstill before changing the drum.
Warning!
Always wear Personal Protective Equipment!
The dust can be hazardous to the health!
Wear a dust mask! Wear protective gloves!
1.
Loosen the 2 bolts of the side plate.
2.
Remove the side plate.
3.
Pull the drum from the axle, and support the drum.
4.6
Mounting the drum
Clean the hexagon axle inside the machine and lubricate it over the whole length.
Slide the drum over the axle until it will not go any further.
Mount the side plate. A side plate which is incorrectly mounted or mounted with force, will shorten the
lifetime of the drum bearings.
Never use the machine without a side plate or with an incorrect mounted side plate!
