Operating Instructions
BG-250G13-S
Operation May
2005
6.1 Operation
The
Operating Instructions
are to be kept
near the location
where the machine
is located and must be
within reach at all
times
.
Note the statutory minimum age!
Specify clearly the
responsibilities of personnel for operation, setting up, servicing and
maintenance work.
Make sure
that only
authorised
personnel
operate or work on the machine.
A regular inspection is necessary to prevent downtimes of your
grinding machine.
See chapter 7 "Maintenance".
Pay attention to following aspects during operation of the
Blastrac Grinding
machine BG-250G13-S
•
Before beginning daily grinding work, be sure all fasteners are tight and
secure. Pay special attention to those that connect drive components.
•
Before switching on, make sure that all guards are in place. Be sure the
dust collector is correctly connected and switched on.
•
Blastrac specially recommends operating the machine with only one dust
collector that has enough suction capacity and high filtration efficiency.
•
Handle all plugs, cables, hoses and operating elements carefully.
•
Before grinding, clean the surface to be treated with a broom. Be sure
there are no objects on or in the floor that may cause damage to the
machine. Be aware of hidden objects that may be below the surface layer
of the concrete.
Always use the appropriate personnel protection when handling
and disposing of concrete dust
. Dispose according to local, state and
federal regulations.
© Copyright Blastrac
Revision (A) 5-4-05
34
