Operating Instructions
BG-250G13-S
General May
2005
© Copyright Blastrac
18
Revision
(A)
5-4-05
3.3 Description of the machine
1
3
4
5
12
13
11
2
Fig. 3.1
1
Hand lever for jack stand
6
Grease Nipple (see Fig 3.4)
11 Jack stand
2
Handgrip
7
Bearing Unit (see Fig 3.4)
12 Caster
3
Emergency stop
8
Flexible coupling (see Fig 3.4)
13 Throttle
4
Suction connection port
9
Diamond disc (see Fig 3.4)
5 Driving
motor
10
Brush
seal (see Fig 3.4)
The Blastrac grinding machine BG-250G13-S can produce a pattern of 10 inches
(250 mm) and distinguishes itself by its high economic efficiency and easy
handling. The machine levels uneven and undulating floors, therefore is also
suitable for optimisation of surfaces before blasting. Levelling the surface will
require less coating to be applied, thus reducing coating costs. The BG-250G13-
S has a grinding speed of 3200 rpm. A flexible coupling allows the disc to float
over varied terrain, therefore keeping diamond contact to the surface at a
maximum.
