MODEL BDC317P DUST COLLECTOR
OPERATING MANUAL
APRIL 2008
SECTION 1
TECHNICAL DATA
4
Dust Collectors
The dust collector 317DCP is exclusively designed to be used
with Blastrac machines. It is only allowed to vacuum
dry
dust.
The manufacturer will not be liable for damage resulting
from such incorrect usage. In these cases the user assumes all
risks.
If the dust collector 317DCP is operated using a generator, this
generator must be operated in accordance with the current U. S.
National Electric Code guidelines or European VDE standards,
as appropriate (this applies to the protective earth conductor in
particular) in order to ensure that all safety devices are
functioning and to eliminate possible damage to electrical
components.
Connected loads (electrical system):
The indicated input current values correspond to the nominal current values of
the motors working under full load. These values are not achieved under normal
operating conditions.
Dimensions:
Dust collector BDC317P
Length
950 mm / 37 in
Width
700 mm / 27.5 in
Height
1500 mm / 59 in
Weight
115 kg / 254 lbs
1.3 OPERATIVE RANGE AND CORRECT USAGE
1.4 STAND-BY POWER SUPPLY (GENERATOR)
