MODEL BDC317P DUST COLLECTOR
OPERATING MANUAL
APRIL 2008
SECTION 2
SAFETY INSTRUCTIONS
12
Dust Collectors
Always verify that any bolted connections that were loosened during service and
maintenance work are properly secure and tight.
If safety devices need to be removed or dismantled during service and repair,
these safety devices must be reinstalled, and inspected immediately after
completion of the servicing and repair work.
Make sure that process materials and replaced parts are disposed of safely and
in an environmentally friendly manner.
Electrical servicing work:
Make sure that electrical components used for replacement purposes comply
with the original parts and are correctly adjusted if necessary.
Regarding the safety advice see also section 2.8 "Safety regulations, electric".
2.6 DEFINITION OF THE SAFETY OFF POSITION
Definition:
The machine is in a safe condition where it cannot be a hazard.
Putting the equipment in the Safety off position means:
Switch off the dust collector.
Wait for standstill of all drives
Pull out mains plug.