Blastrac BDC-3155HCA, Instruction Manual

Page: 25 / 112

Operating manual BDC-3155HCA
info@blastrac.eu
7/16
GB
Extensions
If an extension cable is used, make sure it is suitable for the
power input and protection degree of the vacuum cleaner.
Minimum section of extension cables:
Maximum length = 20 m
Cable = H07 RN - F
Max power (kW) 3 5.5
Minimum section (mm
2
) 2.5 4
WARNING!
Sockets, plugs, connectors and installation of the
extension cable must maintain the IP protection degree
of the vacuum cleaner, as indicated on the data plate.
WARNING!
The vacuum cleaner’s power socket must be protected
by a differential circuit-breaker with surge current
limitation, that shuts off the power supply when the
current discharged to the ground exceeds 30 mA for 30
msec. or an equivalent protection circuit.
WARNING!
Never spray water on the vacuum cleaner: this could
be dangerous for persons and could short circuit the
power supply.
WARNING!
Comply with the safety regulations governing the
vacuumed materials.
Dry applications
[ NOTE ]
The supplied filters and the bag must be installed correctly.
Maintenance and repairs
WARNING!
Disconnect the vacuum cleaner from its power source
before cleaning, servicing, replacing parts or converting
it to obtain another version/variant, the plug must be
removed from the socket.
■ Carry out only the maintenance operations
described in this manual.
■ Use only original spare parts.
■
Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action would
immediately void the EC declaration of conformity
issued with the device.