Blastrac BDC-1114PH CA ASBESTOS, Original Operating Instructions

Page: 3 / 29

3
Introduction
It is important that all persons who are working or maintaining this machine read the manual carefully and
understand it fully. Keep this manual near to the machine, so it can always be consulted. In case you sell the
unit, hand it on to the next owner.
This machine is designed for industrial use by professionals. Only authorized and trained personnel may
operate this machine. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
Machine description
The Blastrac dust collector BDC-1114 is intended for industrial use in combination with Blastrac machines.
It can be used for dry or wet cleaning.
The BDC-1114PM is designed for usage in conditions according to classification M (see below).
The BDC-1114PH is designed for usage in conditions according to classification H (see below).
The BDC-1114PH CA ASBESTOS is designed for usage in Asbestos removal.
Classification acc. standard EN 60335-2-69 – Annexe AA
Type Class Designation
Class M vacuum devices are suitable for aspiration/clearing of
BDC-1114PM M
BDC-1114PH
dry, non-combustible dusts, non-combustible liquids, wood dusts
and hazardous dusts with workplace limit values of ≥ 0.1 mg/m³.
Class H vacuum devices are suitable for aspiration/clearing of
& PH CA
ASBESTOS
H
dry, non-combustible dusts, carcinogenic and pathogenic particles
as well as non-combustible liquids, wood dusts and toxic dusts
with workplace limit values of < 0.1 mg/m³.
Dust emissions into the environment
Class Value of performance
L Retains at least 99 % of particles measuring ≥ 3 µm
M Retains at least 99,9 % of particles measuring ≥ 3 µm
H Retains at least 99,995 % of particles measuring ≥ 3 µm
The BDC-1114 is available in 3 versions :

230 Volt 50/60hz version

110 Volt 50Hz version

120 Volt 60Hz version
All versions dust collectors are complete with an electronic filter cleaner. It can be used in automatic mode for
a constant high suction power.
Application
The BDC-1114 is especially designed to be used in combination with Blastrac hand grinders, hand scarifiers,
hand blaster machines and some other types of Blastrac machines.
But the BDC-1114 is also a perfect dust collector for all other kind of hand equipment and machines.
Contact Blastrac B.V. for the correct execution and combinations.