background image

To return parts for warranty consideration, please call Blastrac Customer Service at 

800-256-3440.    Your  customer  service  representative  will  obtain  the  necessary 
information  to  complete  the  Blastrac  Returned  Merchandise  Authorization  (RMA)  Form. 
Blastrac will then send the RMA form to the customer authorizing the return of the parts 
for  warranty  evaluation.    The  parts  must  be  received  within  sixty  (60)  days  following  the 
RMA origination date or the warranty claim will be denied. Once the parts are received they 
will be evaluated for warranty.   

If the customer cannot wait for the evaluation/replacement of the parts during this 

process, the customer must issue a new purchase order to Blastrac for the replacement 
parts before they can be shipped.  Once the evaluation process is complete and parts are 
deemed a valid warranty claim, a credit will be issued against this invoice. 

4.

The buyer may not return Blastrac products without written authorization to do so

through a Blastrac RMA. 

5.

Blastrac  reserves  the  right  to  inspect  and  determine  the  scope  of  its  warranty

responsibilities for any returned Blastrac products. 

6.

Blastrac makes no warranty with respect to accessories it does not manufacture,

including  but  not  limited  to,  engines,  motors,  batteries,  tires  and  all  other  parts.  See 
component manufacture warranty. 

7.

Blastrac  reserves  the  right  to  make  product  changes  or  improvements  without

prior notice and without undertaking any obligation for such changes or improvements on 
previously sold products.  

8.

The  above  warranty  conditions  can  only  be  altered  by  Blastrac.  Blastrac  must

confirm alterations in writing for each specific transaction. 

9.

Blastrac reserves the right to modify this warranty for used or demo products on an

individual transaction basis. Blastrac will include warranty modifications on its invoices for 
used or demo products.  

10.

BLASTRAC DOES NOT AUTHORIZE ANY PERSON, REPRESENTATIVE, SERVICE OR

SALES OUTLET TO MAKE ANY WARRANTY DIFFERENT FROM THIS PRODUCT WARRANTY. 

11.

EXCEPT FOR ITS PRODUCT REPAIR OR REPLACEMENT OBLGATIONS DESCRIBED

IN THIS PRODUCT WARRANTY, UNDER NO CIRCUMSTANCES SHALL BLASTRAC BE LIABLE 
TO  THE  BUYER,  OR  ANY  OTHER  PERSON,  FOR  ANY  DIRECT,  INCIDENTAL,  OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE BLASTRAC PRODUCT, OR 
FOR  ANY  SPECIAL  OR  CONSEQUENTIAL  DAMAGES  OF  ANY  CHARACTER,  INCLUDING 
WITHOUT  LIMITATIONS,  DAMAGES  FOR  ANY  LOSS  OF  GOODWILL,  WORK  STOPPAGE,  OR 
ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES.  

12.

BLASTRAC  MAKES  NO  OTHER  PRODUCT  WARRANTIES,  EXPRESS  OR  IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. 

This Product Warranty Effective January 1, 2010.  

Summary of Contents for BDC-1114PH CA ASBESTOS






























Reviews: