background image

13201 North Santa Fe Avenue 

 Oklahoma City, OK  73114 

 Ph: 800-256-3440 

 F: 405-478-8608  blastrac.com 

Product Warranty 

Standard Equipment Products: 

 

Blastrac warrants its Blastrac Standard Equipment Products against defects in quality of 

material and workmanship, under normal and proper use for a period of 1 Year from the date of 
delivery,  as  noted  on  the  returned  warranty  registration  card,  or,  in  the  case  of  Rental  Fleet 
Machines,  180  Days  from  the  date  of  assignment  to  Rental  Fleet.  This  warranty  is  non-
transferable  and  is  extended  to  machines  purchased  and  entered  into  the  normal  service  of 
surface  preparation  by  a  recognized  professional  or  qualified  contractor.  Blastrac  makes  this 
warranty only to the buyer who purchases the products directly from Blastrac or its  Authorized 
Distributor. This warranty does not include expendable parts such as, but not limited to, blades, 
blast wheels, wear plates, liners, seals, and electrical components. All purchased parts utilized 
in the manufacture will be honored to the original manufacturer’s specified warranty. 

If  the  buyer  does  not  return  the  warranty  card  or  register  the  product  online  at 

www.blastrac.com within 30 days after taking delivery of Blastrac Standard Equipment Products, 
the warranty period is limited to 6 months from the date of delivery noted on shipping receipt. 

Hand Tool Products: 

Blastrac  warrants  its  BLASTRAC  Hand  Tool  Products,  including  hand  grinders  and 

accessories,  against  defects  in  material  and  workmanship  under  normal and  proper  use  for  a 
period of 90 days from the date of delivery or, in the case of Rental Fleet Machines, from the 
date  of  assignment  to  a  Rental  Fleet.    Blastrac  makes  this  warranty  only  to  the  buyer  who 
purchases the products directly from Blastrac or its authorized distributor.  This warranty does 
not include expendable parts such as blades. 

If  the  buyer  does  not  return  the  warranty  card,  or  register  online  at  www.blastrac.com 

within  15  days  after  taking  delivery  of  Blastrac  Hand  Tool  Products,  the  warranty  period  is 
limited to 30 days from the date of delivery noted on shipping receipt. 

WARRANTY TERMS AND CONDITIONS: 

1.

Blastrac’s obligation under this warranty is limited to the replacement or repair, at

Blastrac’s option, of products and does not include, labor, the cost of transportation, loss 
of operating time, or normal maintenance services.  

2.

This  warranty  does  not  apply  to  failure  occurring  as  a  result  of  abuse,  misuse,

negligence, corrosion, erosion, normal wear and tear, alterations or modifications made to 
products without the express written consent of Blastrac.  

3.

The buyer must submit all warranty claims no later than thirty (30) days after buyer

becomes aware of the basis for any such claim, or should have become aware of the basis 
for any such claim in the exercise of reasonable diligence.  

Summary of Contents for BDC-1114PH CA ASBESTOS






























Reviews: