Blastrac 1-8DECMKI, Operating Manual

Page: 4 / 54

Operating Instructions 1-8DEC 230V
Safety Instructions
1.1 Continued
release the handle mounted traverse control lever to deactivate the travel limit switch
and shut off the blast wheel motor. An emergency stop switch is also provided on the
front of the control panel that may also be used in the event of an emergency situation.
Before actual shotblasting can begin, the operator should be certain that the machine
can clear all obstructions in the work area. Work areas must be dry and clean (no
loose debris) before cleaning can begin.
Maintain all guards in place - Blastrac machines are equipped with guards or
coverings for parts that may be hazardous.
All personnel in the immediate work area
must wear safety glasses with side shields
whenever the machine is blasting. Protective clothing is also recommended. Long
sleeve shirts and safety shoes should be worn and loose clothing should be avoided.
The abrasive used in the machine impacts the work surface at high velocity. Any
leakage during normal operation can sting personnel in the surrounding area.
The
blast head must be sealed to the work surface during operation to prevent
abrasive leakage
.
1.2 Safety Mechanical
1. Before performing any type of maintenance on your Blastrac equipment, be sure
that all moving parts have completely stopped. The blast wheel, for example, may
continue to rotate for a period of time once it has been deactivated.
Assure every power source that can produce mechanical movement has
been deactivated and locked in the off position.
Assure all potential energy sources have been minimized. (Example: Move
the machine to level ground before performing any maintenance so machine
cannot move by gravitational force.)
Assure loose or freely moveable parts of the machine have been secured
against accidental movement.
3