8
c)
Before every use check the lifting eyes/lugs and welds for:
deformation, damages, cracks, corrosion and wear.
d)
Pay attention that the drive unit does not turn away during lifting of the machine.
Hold on to the steering handle until the machine is of the ground.
e)
When lifting the machine from the ground, always use the lowest lifting speed. The cables must first be
tensioned at this speed; they must not be slack when the machine is lifted from the ground.
f)
During hoisting make sure to be at a safe distance from the machine with the most optimal view on the
machine and working environment.
g)
Never stand directly below the machine.
h)
When transporting the machine do so in such a manner that damage due to the effects of the use of force
or incorrect loading and unloading is avoided.
i)
The lifting eyes can also be used to fasten the machine on a pallet or during transport.
j)
Always drive backwards when driving up to a ramp or grade, and forwards when driving of the ramp.
k)
Chock wheels for transport and keep control handle in neutral position.
l)
Don’t leave the machine unsecured on jobsites.
m)
Park the machine always on a flat horizontal and levelled surface.
n)
Remove the abrasive from the machine before transport.
o)
Make sure the electrical cable and dust hose are disconnected before transport.
p)
Store the cleaned and dry machine in a humid free room. Protect the electrical motor from moisture, heat
dust and shocks.
q)
Never use the machine for lifting persons or items.
r)
Only lift the machine as shown in the picture below.
Working direction of the machine.
