4
ATB 19x
Part N
o
: 9848.xx
ASI - TV Transmodulator
ASI
→
ATV (AM)
7. Meaning of LED signals
7.1 LED`s for the ASI ports
Colour
Status
Meaning of display
green
permanently illuminated
ASI channel has been configured as input
flashing
no ASI signal
yellow
permanently illuminated
ASI channel has been configured as output
flashing
no ASI signal
7.2 LED`s on front panel
Designation (Colour)
Status
Meaning of display
STANDBY (red)
permanently illuminated
Component is on standby
flashing
Component faulty (hardware) or level fault
READY (green)
permanently illuminated
Component working, everything ok
flashing
error warnings, depending on signal:
- ASI without sync (e.g. when there is no input signal)
- service settings are not valid
- service is decrypted
ADDR. (yellow)
illuminated or flashing
remote control making contact / data being exchanged
8. Optional hardware variants
8.1 IF interface
The IF interface is an optional additional function/equipment for the modules of the head end system B - LINE. The IF - interface sepa-
rates the internal analogue TV- IF - signal - path and enables the lead out, the external processing and the re-feeding of the IF- signal
into the module.The connection sockets (type SMA) are located at the backside of the individual modules. The impedance is 75 Ohm.
The following device variants are equipped with an IF interface:
9848.09
9848.28
9848.29
View (back side of component)
