2
ATB 19x
Part N
o
: 9848.xx
ASI - TV Transmodulator
ASI
→
ATV (AM)
1. Safety and operating instructions
When assembling, starting-up and adjusting the modules, it is necessary to consider the system specific
references in the manual instruction!
The modules may only be installed and started up by authorized technical personnel!
When assembling the modules into the receiving points, the adherence of the EMC regulations is to be secured!
The assembly and wiring have to be done without voltage!
All active modules may only be operated with the Headend Controller HCB x00 or Bus Extender
BEB x00!
The main voltage and the operating voltage of the modules working by DC have to be in complience to the operating
parameters described in the technical data.
With all work the defaults of the DIN EN 50083 have to be considered! Especially the safetyrelevant execution of the
DIN EN 60728-11 [2] is necessary!
2. Device variants
ATB 191
9848.01
ASI
→
ATV (AM) standard B/G
ATB 191
9848.08
ASI
→
ATV (AM), A/V standard B/G
ATB 191
9848.09
ASI
→
IFI
→
ATV (AM) standard B/G
ATB 192
9848.21
ASI
→
ATV (AM) standard D/K 1*
ATB 192
9848.22
ASI
→
ATV (AM) standard D/K 2*
ATB 192
9848.24
ASI
→
ATV (AM), A/V standard D/K 2*
ATB 192
9848.25
ASI
→
ATV (AM), A/V standard D/K 1*
ATB 192
9848.28
ASI
→
IFI
→
ATV (AM) standard D/K 2*
ATB 192
9848.29
ASI
→
IFI
→
ATV (AM) standard D/K 1*
* D/K 1:
standard
D/K with sound carrier 6,5 MHz and 6,25 MHz
D/K 2:
standard
D/K with sound carrier 6,5 MHz and 5,74 MHz
Minimum software requirements for HCB x00:
9650.03:
version 2.34**
9650.04/.05: version 3.18**
9652.01:
version 3.23**
**) Updates: www.blankom.de
3. General
The ATB 19x ASI -TV transmodulators are components of the B-LINE head end system which has been designed as a complete
package for medium-sized distribution networks. They are components which select a programme from the ASI transport
stream and convert it into an analogue cable TV channel. All the components are programmed via a single central control unit and
thereafter each component will function independently. The status of the modules are displayed via LED’s (see chapter 7.2 „LED`s
on front panel“).
