Blanco drink.soda EVOL-S Pro 526633, Assembly Instructions Manual, Page: 27 / 184

27
-
1 2
Cooling the drinking water:
Please note that after installation, the unit
needs time to cool the entire system. The
unit needs 1 to 2 days to reach the desired
values.
Installation location
The unit should only be installed in frost-proof,
closed rooms (room temperature 16 °C ≤ T
≤ 43 °C). Avoid direct sunlight.
The size of the room in which the system is
installed must be at least 5 m². If the room has
a ceiling height of less than 2 m, the room must
be larger than 5 m².
The unit requires constant air exchange in
order to prevent the installation site from
heating up due to warm exhaust air. Cooling
slits or a suitably sized ventilation grate must
be fi tted if necessary.
The unit requires a level, horizontal surface.
Important: Fire hazard
The unit’s cooling circuit contains the CFC-
free refrigerant isobutane (R600a). This is a
natural gas without any harmful effects on
the environment. However, it is fl ammable
and may be released if the cooling circuit is
damaged. Make sure that no parts of the
cooling circuit are damaged! If the cooling
circuit does become damaged, avoid open
fi re and ignition sources and ensure good
ventilation.
EN