Blanco drink.soda EVOL-S Pro 526633, Assembly Instructions Manual, Page: 26 / 184

26
CO
2
Only the original BLANCO CO
2
cylinders with a
max. standard volume of 425 g may be used in
the unit.
When fastening the CO
2
cylinder, make sure
that it is screwed in tightly. Once you have
screwed in a new CO
2
cylinder, turn it another
quarter as far as it will go to ensure secure
fastening.
CO
2
cylinders are pressurised. Protect them
from direct sunlight, sources of heat and over-
heating.
Mains connection
The connection cable with EU plug is designed
for connection to a CEE 7 type F safety socket
outlet with residual-current circuit breaker
(residual-current device with 30 mA release
current).
The socket outlet must be freely accessible
after the system is installed.
Do not use domestic multiple socket outlets. If
necessary, contact BLANCO customer service.
It is not permitted to use a direct (permanently
installed) electrical line to connect to the
power network.
The cable must be laid in such a way that it
cannot be damaged. Damaged cables must
be replaced.
Important: Magnetic fi eld!
The spray head holder contains a strong
magnet. Patients with a pacemaker should
keep a distance of at least 15 cm.
230 V
10-16 A
with residual-current
circuit breaker
EN