12
SERVICING
TYPE OF
TYPE OF
SINGLE - PHASE
HOT PLATE
CABLE
POWER SUPPLY
CABLE TYPES AND SECTIONS
ATTENTION!!!
If the power supply cable is replaced, the installer should leave the ground wire longer than the phase
conductors (fig. 19) and comply with the recommendations given in paragraph 6.
FIG. 19
H05 RR - F
Section 3 X 0.75 mm
2
Gas hot plate
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person i n order to avoid a hazard.
WARNING: MAINTENANCE MUST ONLY BE
PERFORMED BY AUTHORI
S
ED PERSONS.
