BEFORE LEAVING.
Check all connections for gas leaks with soap and water. DO NOT use a naked flame for
detecting leaks. Ignite all burners to ensure correct operation of gas valves, burners and
ignition. Turn gas taps to low flame position and observe stability of the flame. When satisfied
with the cooker, please instruct the user on the correct method of operation. In case the
appliance fails to operate correctly after all checks have been carried out, please call
TECHNICAL SERVICE.
3
USER’S GUIDE
3.1 HOW TO USE BURNERS FOR GAS COOKTOP MODELS
If you use the burners properly, it will maximise energy efficiency, thus saving energy.
The power of the burners (MJ/h) is shown in Table 1.
For optimum efficiency, you must choose pans according to the size of the burner see the table
3.
If the flame is wider than the pan then you are wasting energy.
The right position is indicated in this figure.
IMPORTANT ( BFS60WXFF ) :
In the models with triple ring burner, wok burner:
It is important to ensure that the burner caps are located
correctly on the burner to ensure good burning.
NO
YES
IGNITION OF THE BURNERS
To ignite the burners proceed as follows:
- Press the knob. Selecting the burner to use, push the corresponding knob and turn it counter
clockwise to the “full position”, indicated by a large flame.
- To reduce the power to turn the knob to the “low position”, indicated by a small flame
.
To switch off the burner, just turn the knob clockwise to the “off position”, indicated by a black
circle in the upper position of the panel
.
9
