CLEANING OF THE FAN
Periodically the fan should be cleaned with warm water and suitable detergents:
Wait until the oven has cooled down.
Unscrew the four screws A
Unscrew the central nut C
Extract the fan D and clean it
Reassemble in the reverse order, paying attention that the central E seat coincides with the peg
F placed on the motor shaft
Protection Filter of the Oven Fan ( Optional )
During the cooking, to minimise fat/debris going on to the fan, install the filter cover.
When cooking is complete, remove the filter and wash it.
To install the filter, mount the filter leaning it against the rear wall at the same level
of the fan, then push the “tang” downwards. Reverse this operation to remove the
filter.
REPLACING THE OVEN BULB
Once the appliance has been electrically disconnected, unscrew the glass protection cap and
the bulb, replacing it with another one suitable for high temperatures (300ºC) having the
following characteristics:
Voltage: 240 V
Power: 25 W
Socket: E14
Reassemble the glass cup and reconnect the appliance.
Abnormal Operation
Any of the following are considered to be abnormal operation and may require servicing :
. Yellow tipping of the hob burner flame.
. Sooting up of cooking utensils.
. Burners not igniting properly.
. Burners failing to remain alight.
. Burners extinguished by oven door.
. Gas valves, which are difficult to turn.
In case the appliance fails to operate correctly, please call a TECHNICAL SERVICE CENTRE.
17
