8
USE
LOCK FUNCTION
Lock function (
):
this function prevents the hob from being switched on accidentally (childproof
safety device). To activate it, the
button
must be pressed for three seconds (the warning light
comes
on). It is not possible to
adjust
the heated areas when
is active. While the
cooking zones
are still
working, it is possible to switch off the heating areas in
. This function is deactivated by pressing the
button for two seconds, for all configurations.
RESIDUAL HEAT
Every plate has a device to indicate the presence of residual heat. After any plate has been switched off,
a flashing light may be shown on
the display. This signal indicates that the particular cooking area is
still very hot. It is possible to start cooking food when the light
is flashing, reactivating the
cooking
zone
required.
SWITCHING OFF THE
COOKING ZONES
When the
Cooking zones
are switched off, the operating power display indicates
0
.
The
Cooking zones
will be automatically deactivated 5 seconds after the display indicates 0. If the
cooking zones
are hot,
the residual heat indicator will appear after they are switched off
.
SWITCHING OFF THE HOB
The hob is switched off by keeping the
button
pressed for one second, even with the
cooking
zones
in
operation. All the plates will be deactivated and the hob will be switched off completely. If the
cooking zones
are
hot, the residual heat indicator will appear a few seconds after the hob
is switched
off.
AUTOMATIC SAFETY OFF
If the power level is not changed during a present time, the corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on the selected cooking level.
Power level
Max. time on (hours)
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
