USE
HEAT-UP FUNCTIONS
This function takes the cooking level to maximum power for a defined time.
Activate the heat-up function
After removing the control panel lock (pressing the
symbol for 2 seconds), switch on the hob by
pressing the button
for a
2
seconds.
Select the desired cooking zone, then use the button to increase the cooking level to 9 (Maximum
and press the again. Once this is done the display will show the power level blinking with a blinking
dot for 10 seconds (Fig A, B) during which time the desired power level must be selected. Confirm the
power level by not pressing any button for 5 seconds. After this time, a beep sounds and the dot is fixed
on the display with the selected cooking level. This indicated that the Heat Up Function is on.
Deactivate the heat-up function
To deactivate the heat up function, hold the button of the selected cooking zone and wind down the
cooking level to 0.
Power level
1
2
3
4
5
6
7
8
Time (sec.)
1’12’’
2’44’’
4’48’’
5’28’’
6’30’’
1’12’’
2’44’’
2’44’’
FIG. A
FIG. B
7
