Blancett B2800 Standard, Programming & Installation Manual

Page: 8 / 20

8
SELECT THE DISPLAY FUNCTION – The monitor can
display RATE or TOTAL or alternate between BOTH rate
and total. If the current selection is correct, press the ENTER
key to advance to the next parameter. To change to an alter-
nate display mode, use the arrow keys to scroll to the desired
display mode and press ENTER to save the choice.
A TEST function is also available in the Display Function
sub-menu. With the test function selected the display acts like
a frequency counter and displays the raw input frequency be-
ing supplied to the frequency input terminals. This is very
useful when troubleshooting flow problems.
TOTALIZER PULSE OUTPUT – The pulse output pa-
rameter can be either enabled or disabled. When enabled this
output generates 20mS duration pulse for every time the least
significant digit of the totalizer increments. The amplitude of
the pulse is dependent on the voltage level of the supply con-
nected to the pulse output and is limited to a max. 30 VDC.
PASSWORD – Password protection prevents unauthorized
users from changing programming information. Initially, the
password is set to all zeros. To change the password, simply
enter any 4 digit code using the arrow keys as previously de-
scribed, enter the password value. Pressing ENTER once will
Note: The total unit’s output multiplier cannot be modi-
fied in the Simplified program level. This option is re-
served in the Advanced program level.
SELECTION RATE TOTAL
GPM/GAL Gallons per Minute Gallons
LPM/LIT Liters per Minute Liters
M3PH/M3 Cubic Meters per Hour Cubic Meters
M3PD/M3 Cubic Meters per Day Cubic Meters
BPD/BBL Oil Barrels per Day Oil Barrels