Blakeslee B-20, Owner'S Manual

Page: 16 / 37

Operation
In Order for your mixer to perform at top efficiency at all times, it is necessary that you follow the
recommendations as laid down by the designing engineers. Give your mixer the same attention you
would give your automobile and your Blakeslee-Built Mixer will give you many years of satisfactory
service.
CAUTION:
1
8
7 4
2
3
1.
Auxiliary Drive Socket
2. Speed Change Lever
3. “ON-OFF” Power Switch
4. Bowl Lift Hand Lever
5. Bowl
Support
6. Nameplate & serial Number
7. Attachment
Spindle
8. Beater Shaft
5
6
Do not attempt to change attachments while mixer in in
operation. Always shut off mixer before placing hands
or kitchen utencils near or in the mixing bowl
Operating the Bowl Lift
The bowl is raised to working position by means of a lever lcated on the right-hand side of the mixer.
Once raised, the bowl will be automatically located in its proper operating position. The bowl lift is
preadjusted to stop at the proper working position before the mixer is shipped.
Attaching Beaters & Whips
The beaters and whips used with your mixer have been
designed to make fastening of the attachment positive and
rapid.
To engage the attachment, line up the slots in the attachment
with the drive pin on the beater shaft. Raise the attachment
and twist to the right. When released the attachment will drop
slightly into full locked position.
To remove the attachment, grasp near the top, raise slightly
while twisting to the left and slide downward.
-14-