PROAPW300L- 300Mbps 2.4GHz In Wall Access Point
with RJ45 Port
PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point
with RJ45 Port
PROAPCEILING- 1200Mbps 2.4 & 5GHz Ceiling Access Point
Advanced Instructions
[email protected]
www.blake-uk.com
0114 223 5000
PD2011-8246-04
If you’re reading this on a computer simply click here
If you wish to reconnect to the AP for additional setting up (while in AP mode)
then please scan the network with an app (We suggest Net Analyzer) and look
for the AP on the network with MAC address starting
70:B3:D5:9D
(This MAC address range is exclusive to ProWiFi APs)
This will give you the IP that’s been
allocated to the AP by the router. Type this
number usually starting 192.168.***.*** into your internet browser and the web
login screen will appear. Default password is admin.
If this has been changed and lost then you will require to reset the AP.
If you have set the device in AP mode and you need to connect the devices
LAN Port with A PC. Set static IP on PC to 192.168.188.250 and set the
Gateway to the default IP address of 192.168.188.253 (as below). Open
browser, input AP IP address 192.168.188.253 to log into the WEB GUI using
the default password of admin.
Remember to reset this once you have completed setup or you may not be able to
connect to other networks.
