Blagdon Powersafe Series Quick Start Manual Download Page 8

FAULTS - PROBLEMS PROCEDURE

Before returning your Blagdon pump to your dealer or contacting our Consumer Advice Department, 
please carry out the following steps. These will solve most problems quickly and easily:

1.  

Ensure electrical procedure has been followed fully. Check fuses and any cable connectors or 
switch boxes.

2. 

Follow the maintenance steps from page 8, follow the troubleshooting options from page12

3. 

Return pump to point of purchase for inspection and advice (proof of purchase may be required)

CONSUMER ADVICE CONTACT DETAILS

Interpet (Blagdon) Consumer Advice Department 

Vincent Lane, Dorking, Surrey RH4 3YX

E-mail: [email protected]  
www.blagdonwatergardening.co.uk 
www.pondaquariumproblemsolver.co.uk/blagdon

IMPORTANT

8

GUARANTEE

This product is guaranteed against defects in material and workmanship for 3 years from the date 
of purchase, under normal usage. The guarantee DOES NOT APPLY in case of improper use, 
negligence, lack of maintenance or accidental damage to the Switch box. If the Switch box fails 
due to a manufacturing fault within this period it will be either repaired or replaced free of charge. 
Liability is limited to replacement of the faulty product only; no other costs will be reimbursed. 

This guarantee is not transferable and does not affect your statutory rights. This guarantee does not 
confer any rights other than those expressly set out above. Excludes rubber buttons and fuses, which 
may require replacing annually. If any parts need replacing, spares are available from your retailer.

Summary of Contents for Powersafe Series









Reviews: