Page 8
GETTING STARTED
Install handle bar
Before using your XTR-Street, loosen the 4 bolts from the
Billet Aluminum Stem with the Allen Wrench provided, and
then remove the stem from the cap as shown in Fig 1.
Place handle bar onto the Billet cap with the hole facing
down towards the threaded bolt as shown with arrow in
Fig 2.
Place the Billet Stem on top of the handle bar and the cap
and tighten the bolts to secure the handle bar onto the cap
as shown in Fig 3.
Unfolding Instruction
1. To unfold the XTR-Street, begin by pressing
down on the FOLDING HANDLE with one
hand (Fig. 4), while gently pulling up on the
handlebar with the other hand.
Cap
Stem
Fig. 1
Fig. 2
Fig. 3
Fig. 4
