6
ASSEMBLY INSTRUCTIONS CONTINUED
Illstrations of treadmill assembly.
A minimum of two people are
required to assemble this
treadmill. Also, read and
understand all instructions
thoroughly before assembling
the treadmill.
Failure to do so could result in
injury.
1.
Use 2 bolts (b) to secure
the bottle holder (M) to the
right side upright (D).
NOTE: Bottle hold can be
placed onto either the left
(C) or right (D) side
uprights.
You will find two holes on
one side and that is the
inner side of the left and
right uprights.
2.
Tie the attached black
guide wire to the wire
connector and feed the
wire slowly through the
bottom right upright (D)
opening and pull the
connector from the top. Be
sure not to pull on the wire
too hard if it does not feed
easily.
Then secure the left (C)
and right uprights (D) onto
the base frame with 8
bolts (c) using 5mm allen
wrench as shown.
Note: Leave all handlebar
bolts loose until console
display has been installed,
then tighten all of the
handlebar bolts.
