27
28
RepaIRs
RepaIRs
SAfETy LINE REpLACEmENT
For the same reasons as the Depower Line, the Safety Line might also need
replacement. This is usually the case once excessive discoloring has occurred.
•
Detach safety ring and stopper ball from safety line. Be sure to not misplace.
•
Remove safety line from rest of bar system and discard.
•
Take new safety line and attach it to the flying line.
•
Thread the safety line through the middle of the swivel and through the middle
of the QR system.
•
Thread safety line through stopper ball and using Lark’s Head knot attach the
safety ring.
CHICKEN LOOp REpLACEmENT
Most likely you will NOT find it necessary to replace the chicken loop for the life of
the bar, but if you enjoy unhooked riding, Blade offers a larger chicken loop that
might be more convenient to use.
•
Remove the bungee cord off the hook on the slider cover (same way as replacing
depower line).
•
Using a thin flat head screwdriver push out the pin holding the chicken loop.
•
Using pliers pull the pin out completely.
•
Take the new chicken loop and insert it until the hole of the pin lines up with the
stainless steel cylinder on the chicken loop.
•
Insert the pin through the hole. make sure the pin is completely through and
even on both sides.
•
Place the bungee cord back onto the hook on Slider cover (same as depower
line replacement).
Summary of Contents for 2013 LADY FAT
Page 1: ... BLADEKITEBOARDING USER MANUAL 2013 ...
Page 19: ......
