manualshive.com logo in svg

BLADDERSCAN BVI 6100, Operation & Maintenance Manual, Page: 14 / 48

Share
Download
BLADDERSCAN BVI 6100 Operation & Maintenance Manual Download Page 14

8

Scan Point with QuickPrint is a network‑based version of the application. Archived patient data is 
stored securely on HIPAA‑compliant, Verathon

®

‑maintained servers. Users can access records from any 

Internet‑enabled, Windows‑based PC. Scan Point with QuickPrint allows users to maintain the most recent 
software for their instruments, to calibrate their instruments themselves without having to send them in for 
service, and also enables remote diagnostics and troubleshooting by Verathon service technicians.

SYSTEM COMPONENTS & ACCESSORIES

REQUIRED SYSTEM COMPONENTS

Table 1. 

Required System Components and Accessories

PART

DESCRIPTION

BladderScan BVI 6100

Hand‑held, wireless, battery‑operated, ultrasound bladder volume 
instrument.

Charging cradle

Use the charging cradle to charge the BladderScan instrument’s 
internal battery. The charging cradle plugs directly into an electrical 
wall outlet. Before using your BladderScan instrument, you must 
charge it for a minimum of 6 hours.

BladderScan BVI 6000 series in‑service CD

Includes the electronic version of this operations and maintenance 
manual.

Activation tool

If needed, use this tool in order to press the Activation button on 
the instrument.

Summary of Contents for BVI 6100

















































Reviews:

No comments