DR900X-1CH
17
ENGLISH
Note
y
Up to 50 event recordings (impact, manual) can be locked from being overwritten. By default, this feature is enabled. In the
firmware settings, you can choose to either overwrite them with new event files when the event file storage is full or lock the
50 event files and save the new event files in loop recording storage. Please note that formatting the microSD card deletes all the
recordings including the locked event files.
y
The recording LED is on while recording (default setting) and the GPS LED is on when a GPS signal is received. There are
4 recording modes: Normal, Event, Parking and Manual. The dashcam starts recording in normal mode, switches to event mode
when an impact is detected, and switches to parking mode when the vehicle is turned off (Hardwiring power cable, ACC+) or
stationary for 5 minutes (Cigarette lighter power cable, G-sensor). Touching the proximity sensor turns on/off audio recording or
triggers manual recording depending on the firmware settings.
y
When you run the dashcam for the first time the firmware is automatically loaded onto the microSD card. After the firmware has
been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
Summary of Contents for DR900X-1CH
