BlackVue DR900X-1CH, Manual

Page: 15 / 107

DR900X-1CH
15
ENGLISH
5
Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Skip to 9 for Hardwiring Power Cable
setup.
6
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
Power cord
7
Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card. When
the microSD card fills up, the newest video files will start to replace the oldest video files (called loop recording) – so you will
always have the most recent video files.
8
Turn off the engine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine
is off please connect the Hardwiring Power Cable (included in the box) or install a Power Magic Battery Pack (sold separately). A
Hardwiring Power Cable uses the automotive battery to power your dashcam when the engine is off. A low voltage power cut-
off function and a parking mode timer to protect the automotive battery from discharge is installed in the device. Settings can be
changed in the BlackVue App or Viewer.
9
Locate the fuse box to connect the hardwiring power cable.
Note
y
Location of the fuse box differ by manufacturer or model. For details, refer to the vehicle owner's manual.
9-1
After removing fuse panel cover, find a fuse that powers on when engine is turned on (ex.cigarette lighter socket, audio, etc) and
another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light). Connect the ACC+ cable to a
fuse that powers on after engine start, and BATT+ cable to a fuse that remains powered on after engine is turned off.