BlackVue DR750X-2CH, Manual

Page: 17 / 112

DR750X-2CH
17
ENGLISH
9
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
Power cord
Rear camera connection cable
10
Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card. When
the microSD card fills up, the newest video files will start to replace the oldest video files (called loop recording) – so you will
always have the most recent video files.
11
Turn off the engine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine
is off please connect the Hardwiring Power Cable (included in the box) or install a Power Magic Battery Pack (sold separately). A
Hardwiring Power Cable uses the automotive battery to power your dashcam when the engine is off. A low voltage power cut-
off function and a parking mode timer to protect the automotive battery from discharge is installed in the device. Settings can be
changed in the BlackVue App or Viewer.
12
Locate the fuse box to connect the hardwiring power cable.
Note
y
Location of the fuse box differ by manufacturer or model. For details, refer to the vehicle owner's manual.