DR650S-2CH
17
Note
y
The recording LED blinks while recording (default setting) and the GPS LED is on when a GPS signal is received. There are 3
recording modes: Normal, Event and Parking. The dashcam starts recording in normal mode, switches to event mode when an
impact is detected, and switches to parking mode if the vehicle is stationary for 5 minutes.
y
When you run the dashcam for the first time the firmware is automatically loaded onto the microSD card. After the firmware has
been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
10
Turn off the engine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine is
off please install a
Power Magic Battery Pack
(sold separately) or a
Power Magic Pro
(sold separately). A
Power Magic Pro
powers
your dashcam when the engine is off by hardwiring it to the automotive battery. A low voltage power cut-off function and a parking
mode timer protect the automotive battery from discharge.
Summary of Contents for DR650S-2CH TRUCK
