BlackVue DR430-2CH, User Manual

Page: 14 / 55

14 BLACKVUE
10
Plug the power cord into the cigarette lighter socket and the front camera.
11
Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card. When the
microSD card fills up, the newest video files will start to replace the oldest video files (called
loop recording
) - so you will always
have the most recent video files.
Note
y
The recording LED blinks while recording (default setting) and the GPS LED is on when a GPS signal is received. There are 3
recording modes: Normal, Event and Parking. The dashcam starts recording in normal mode, switches to event mode when an
impact is detected, and switches to parking mode if the vehicle is stationary for 5 minutes.
y
When you run the dashcam for the first time the firmware is automatically loaded onto the microSD card. After the firmware
has been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
12
Turn off the engine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine
is off please install a
Power Magic Pro (sold separately). A Power Magic Pro powers your dashcam when the engine is off by
hardwiring it to the automotive battery. A low voltage power cut-off function and a parking mode timer protect the automotive
battery from discharge.