Revision 5.00 / LB-0729 – CerePlex µ IFU
© 2020 Blackrock Microsystems, LLC
11
Instructions for Assembly
1. If using a Cerebus recording system, turn off the power on the Digital Hub 128
before connecting. If using a CerePlex Direct, turn off the power before
connecting.
2. Plug the input connector on the CerePlex µ into the connector attached to the
electrodes or signal simulator.
3. Connect the cable to the CerePlex µ and the CerePlex µ adaptor.
4. Plug the HDMI connector on the adaptor to the connector on the back of the
Digital Hub 128, or the front of the CerePlex Direct.
5. Make sure the connections are secured.
6. Turn on the power of the Digital Hub 128 or the CerePlex Direct.
7. After recording, turn off the Digital Hub 128 or CerePlex Direct before any
disconnection.
Cleaning, Maintenance, and Disposal
Cleaning
The CerePlex
µ
may be cleaning with isopropyl alcohol (70%). Do not apply
pressure to the circuit board or you may damage it. Let dry completely before
use.
Maintenance
The CerePlex
µ
does not require maintenance.
Disposal
All devices, both used and unused, should not be disposed with household
waste. Return to a recycling point for electric and electronic devices.
Magnetic Resonance
The CerePlex
µ
has not been evaluated for safety and compatibility in the MR
environment. The CerePlex
µ
has not been tested for heating, migration, or image
artifact in the MR environment.
