________________________________________PL10C / PL20B_____________________________________
6
RISK FOR THE OPERATOR
(Figure 4)
This risk arises in cases when the operator is not standing in the correct place by the pump. When the lift with the
vehicle is being lowered, the operator MUST NOT stand below the descending system. It is imperative that the
operator MUST be standing in the operating zone during the lifting and lowering operations.
Figure 4
RISK OF ELECTROCUTION
Never spray water or steam of solvents or paint in the area immediately surrounding the platform and the pump.
(Figure 5)
Figure 5
RISK OF SLIPPING
This risk can be overcome by avoiding the spillage of oil or grease in the area surrounding the lift. Apart from that,
any oil spillage which may occur should be thoroughly removed from the spot. (Figure 6)
Figure 6
Never enter the vehicle or start the motor when the vehicle is on the lift. (Figure 7)
Figure 7
