________________________________________PL10C / PL20B_____________________________________
14
CAUTION
Before you perform this action, make sure nobody is under the lift or in the safety area
3.
On the 2 front electro valves, unscrew the knurled brass knobs under the black caps by 5 turns. (Make sure you
don’t lose the washers) (Figure16)
4.
On the third electro valve on the left, remove the black cap, slowly unscrew the knurled knob in order to control
the speed of descent of the lift.
5.
Tighten the 3 knobs and the caps securely after repair.
VII) PULLING SYSTEM (PL10C version)
VEHICLE SET-UP
-
Bring the vehicle on the lift and centre it. For help, place white stripes on the floor at a distance of 550 mm from
the frame (on the side). The front of the vehicle must be positioned at approximately 450 mm from the front of the
frame.
Figure 18
-
Spread out the 4 arms and place them by the locations specified by the car manufacturer to lift the vehicle.
Figure 19
-
Place the 4 wheel stands and lower the vehicle to make it rest on the stands.
