________________________________________PL10C / PL20B_____________________________________
4
WARNING
USE THE LIFT ONLY IF ALL THE SAFETY DEVICES ARE WORKING PROPERLY. IF THESE RULES ARE
NOT FOLLOWED, SERIOUS INJURY COULD BE CAUSED TO THE PERSON AS WELL AS IRREPARABLE
DAMAGE TO THE LIFT AND THE VEHICLE ON THE LIFT.
GENERAL PRECAUTIONS:
-
The operator is bound to follow the regulations which apply in the country in which this lift is installed.
In addition, the operator must:
-
Always work in the work area as designated in the manual.
-
Never remove the protective guards or dismantle or shut down the mechanical, electrical or other types
of safety arrangements.
-
Read the safety regulations related to the lift and read the safety information provided in this manual
The following terms have been used in this manual to describe the various types of risk:
DANGER
: there is a direct possibility of danger which could lead to serious injury or death
WARNING
: indicates situations and / or actions which are unsafe and could lead to injuries of various
types except death.
CAUTION
: indicates situations and/or actions, which are unsafe and could lead to light injuries to
persons and/or damage to the lift, the vehicle and other properties.
RISK OF DAMAGE DUE TO ELECTRICITY
: special safety arrangements have been made
on the lift in places where the risks are very high.
RISK AND PROTECTIVE MEDIA
: the risk to which the operator is exposed when the vehicle is in a
raised position, together with the protective media which have been installed, in order to limit the possible
dangers.
DANGER
It is strictly forbidden to use the lift before it is fixed to the ground
.
(Risk of tipping over)
Fasten the lift to the ground by the means of the bolts supplied, as indicated in the chapter INSTALLATION
WARNING
Do not move the vehicle when it is on the platform. The platforms and the rubber fittings should only be removed
at the lowest lifting position, and when there is no load
The vehicle must be placed on the lift in such a way that there is a uniform distribution of weight over the
platforms.
To ensure the safety of persons and materials, you must check that:
-
The safety zone is kept under observation during the lifting process
