1.0
GENERAL INFORMATION
WARNING
Tools are
NOT
insulated for use on or near
energized conductors. Use of these tools
near energized conductors may lead to
electrical shock, causing severe injury or
death.
DO NOT
use these tools near
energized conductors without adequately
insulating operator and surroundings.
WARNING
Pinch point hazard. Compression Dies at high
force can cause severe personal injury. Keep
all body parts away from moving parts of the
tool during operation.
SAFETY RULES
1.1
1.
BE FAMILIAR WITH YOUR TOOL.
Read the instruction manual. Become aware of its proper
usage as well as the potential hazards.
2.
KEEP WORK AREA CLEAN AND WELL LIGHTED.
Poor lighting and cluttered areas invite accidents.
3.
USE SAFETY GLASSES.
4.
MAINTAIN TOOL WITH CARE.
Keep tool in good condition at all times. Keep it clean for
best and safest performance.
5.
DON'T OVER-REACH.
Keep proper footing and balance at all times.
6.
NEVER ATTEMPT TO MAKE A COMPRESSION ON A
"HOT" LINE.
Never assume the power is OFF! Determine beforehand if
any electrical hazards could exist when making a
connection to a line or wire.
7.
KEEP FINGERS AND OTHER BODY PARTS AWAY
FROM COMPRESSION DIES & MOVING PARTS.
FEATURES
1.2
• Fully automatic, self-contained power tool.
• Dieless operation across entire range - No die
changes required.
• One handed operation - control ram advancement
and retraction with one hand.
• Open C-Shaped Head - Only one crimp required all
applications.
SPECIFICATIONS
HYDRAULIC COMPRESSION TOOL:
TBM8-750BSCR
Drive Unit:
18.0V DC Motor
Dimensions:
17.8”L x 3.5”W x 7.0”H
Weight:
12.6 lbs. without battery
Capacities:
Cu #8-900 Kcmil
AL #10-750 Kcmil
Stroke:
2.36"
Output:
12 Tons @ 10,000 psi
Milwaukee M18 Red Lithium
BATTERY:
Battery Type:
Sealed Lithium Ion
Voltage:
18.0V DC
Dimensions:
4.7”L x 3.2W x 2.2H
Capacities:
1.5Ah
Weight:
0.94 lbs.
Charging time:
30 - 60 minutes
CHARGER:
Milwaukee M18 Battery Charger
Input Voltage:
120 V AC Single Phase
Output Voltage:
12 - 18 V DC
1.3
IMPORTANT: Read
and understand all of the
instructions and safety information in this manual
before operating or servicing this tool.
TA05250 B Page 2 of 8
