17
CHAPTER 2: Introduction
2.3.1 V
ERTICAL
S
URGE
S
UPPRESSOR
S
TRIP
(SP197A, SP198A, SP199A)
NOTE
The SP197A, SP198A, and SP199A units are electrically rated at 15
amps, 120 VAC, and 60 Hz. 15 amps is the maximum current for the
entire unit, not individual outlets.
The SP197A is a 48" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 10 outlets on its front panel.
The SP198A is a 70" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 11 outlets on its front panel.
The SP199A is a 77" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 12 outlets on its front panel.
Vertical Surge Suppressor Strips SP197A, SP198A, and SP199A all have the
following features:
• Electrical and mechanical grounding.
• UL 1449 330-volt clamping category (actually clamps at 312 volts).
• Resists EMI/RFI up to 40 dB.
• LED goes dark to show that the unit has done its job—it has taken a major
surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can’t be accidentally turned
off.
2.3.2 V
ERTICAL
S
URGE
S
UPPRESSOR
S
TRIP
(SP216A, SP217A, SP218A)
NOTE
The SP216A, SP217A, or SP218A units are electrically rated at 20 amps,
120 VAC, and 60 Hz. 20 amps is the maximum current for the entire unit,
not individual outlets.
The SP216A is a 48" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 10 outlets on its front panel.
The SP217A is a 70" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 11 outlets on its front panel.
The SP218A is a 77" rackmountable power strip that mounts from top to bottom in
the rear of standard 19" racks. It has 12 outlets on its front panel.
Summary of Contents for PS186A
Page 3: ......
